Heat Blocking Face Shield
Heat Blocking Face Shield(Easy-to-Use)
This is a heat-blocking face shield that can be easily used in various industrial settings. It comes in three brightness levels (bright, medium, and dark) depending on the visible light transmittance. Additionally, there are two types available based on the usage form: frontal protection type and safety helmet attachment type.
- Standard Specification
Frontal Protection Type - FB Series
This is a heat-blocking face shield that can be used without a safety helmet. It primarily protects the forehead and can be adjusted to fit the wearer’s head size with three adjustment mechanisms.
|
| |||
|---|---|---|---|
|
Material
|
Specially Coated Visor: PC / Browguard: PP
| ||
|
Size(mm)
|
285 x 225 x 280
| ||
|
Product Type
|
Frontal Protection Type
| ||
|
Transmittance
|
High(FB-20TA) / Medium(FB-20MA) / Low(FB-20GA)
| ||
Safety Helmet Attachment Type - FBS Series
This is a heat-blocking face shield designed to be attached to a safety helmet. It can be used with most safety helmets by using the tension spring at the back.
|
| |||
|---|---|---|---|
|
Material
|
Specially Coated Visor: PC / Bracket: PP
| ||
|
Size(mm)
|
260 x 205 x 205
| ||
|
Product Type
|
Safety Helmet Attachment Type
| ||
|
Transmittance
|
High(FBS-H-50) / Medium(FBS-M-23) / Low(FBS-L-14)
| ||
Heat-blocking Coated Visor
This is a specially coated visor compatible with both frontal protection type and safety helmet attachment type products. It features heat-blocking and anti-contamination surface treatment, and only the specially coated visor can be replaced if damaged.
|
| |||
|---|---|---|---|
|
Material
|
PC
| ||
|
Size(mm)
|
395 x 200 x 1
| ||
|
Transmittance
|
High, Medium, Low
| ||
Transmittance by brightness level of heat-blocking coated lenses
(including comparison with other products)
|
Visor Transmittance |
UV Transmittance(%) (Below 380nm) |
VIS Transmittance(%) (380nm~780nm) |
IR Transmittance(%) (780nm~1400nm) |
IR Transmittance(%) (780nm~2000nm) |
|---|---|---|---|---|
|
High |
12.8 |
47.5 |
21.1 |
12.1 |
|
Medium |
7.9 |
25.9 |
1.0 |
0.5 |
|
Low |
10.9 |
15.1 |
0.9 |
0.5 |
|
Tranparent(Non-coated) |
45.8 |
91.4 |
91.1 |
86.4 |
|
Green(Non-coated) |
2.6 |
19.9 |
88.9 |
83.6 |
Our product’s infrared transmittance is significantly lower compared to Non-coated products, providing superior heat blocking performance.
Transmittance – High
Transmittance – Medium
Transmittance – Low
Friend of Industry Technology Information Testing & Research Institute(FITI) Heat Resistance Test for Heat-blocking Coated Lenses(KS K ISO 6942:2002)
* The graph above compares results from testing five types commissioned to the certified testing institute (FITI), enabling a comparative analysis.
| The time (S) required for the calorimeter temperature to rise from room temperature to +24°C | ||
|---|---|---|
|
ILJIN OPTEC |
High(FB-20TA, FBS-H-50) |
More than 300s |
|
Medium(FB-20MA, FBS-M-23) |
||
|
Low(FB-20GA, FBS-L-14) |
||
|
Competitor’s product |
Transparent |
41.7s |
|
Green |
47.1s |
|
-
Our product exhibits significantly superior heat insulation performance compared to the competitor’s product.
Comparison of Light Transmission by Transmittance of Heat-blocking Coated Visors
Transmittance – High
Transmittance – Medium
Transmittance – Low
- This product has been approved by the Korea Occupational Safety and Health Agency.
- It has completed field testing.